In
industrial processing operation there are cases where machineries should be
started one after the another. One example of electrical control applied to
machineries in a processing operation is the sequential control shown in figure below (A) and (B). The 3 motors; M1, M2 and M3 are drive mechanical machine. Motor
M1 is first started. After a Pre-set time, Motor M2 is started automatically.
Later, with another pre-set time, motor M3 is started.
Control Operation
The first
stage of control operation is started by pressing the start push button switch
shown in figure 16 (a). Contactor C, timer TR1, and pilot lamp A are energized.
Contact C1 (13-14) will close to maintain contactor C, timer TR1, and pilot
lamp A. Contacts C2 (1-2,3-4,5-6) will also closed to energize and operate the
motor M1, see figure 16 (b). Likewise the instantaneous timer contact TR1 (1-3)
will close to prepare the second stage of operation
(A) Control circuit of 3 stages sequential Control.
After the
pre-set time of the timer TR1, the delay contact TR1 (8-6) will close. This
will energize contactor C2, timer TR2, and pilot lamp B. Contact C2
(1-2,3-4,5-6) will closed to energized to operate the motor M2. Almost
instantly the instantaneous timer contact TR2 (1-2) will close also to prepare
the third stage of operation.
After the
pre-set time of timer TR2, the delay contact TR2 (8-6) will close. This will
energize contactor C3 and pilot lamp C. Contact C3 (1-2,3-4,5-6) will closed to
energized and operate is fully
accomplished when the three motors M1, M2, and M3 are all operating.
(b) Power
circuit of 3 stages sequential
Control.
To
de-energized the whole operation, press the stop push button.
OBII Scanner Installation
Read Next Article:---> PERIODIC SEQUENCE CONTROL
Back to Previous Article:<--- FLOAT SWITCH MOTOR PUMP CONTROL
OBII Scanner Installation
Read Next Article:---> PERIODIC SEQUENCE CONTROL
Back to Previous Article:<--- FLOAT SWITCH MOTOR PUMP CONTROL
Enter your comment...very good but what is the use of instant contact of a timer?
ReplyDeleteWhat is the working of pilot lamps?
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteVery nice lot i learn from here..electrician in houston
ReplyDeleteNice blog thanks for sharing details Click here
ReplyDeletevery nice blog !!! keep sharing Three Phase DOL Motor Starter
ReplyDeleteI need to tha 3 stage motor control circuit full step by step relay and selector switch
ReplyDeleteThis article contains some of the most informative content I’ve read in quite some time. The points of this content are clear-cut and engaging. I think much like this writer.I must appreciate you for providing such a valuable content for us. This is one amazing piece of article. Helped a lot in increasing my knowledge.
ReplyDeleteKeto BodyTone
Lipo Cla Avis
ReplyDeleteLe problème pour l’obtention d’une silhouette parfaite est actuel, comme en témoigne l’intérêt porté à cette question dans différentes sources.
https://care2fit.com/lipo-cla-avis/
You, my pal, ROCK! I found simply the information I already searched all over the place and simply couldn't come across. What a perfect web-site.
ReplyDeleteHealth Tips + write for us
So That visitors and readers can easily Understand the concept.
ReplyDeleteHome Improvement Write for us
Thank you for the efforts you been putting on making your site such an interesting and informative place to browse through. I'll be visiting your site again to gather some more valuable information. You truly did a good job.
ReplyDeleteBeauty + write for us"
Nice writeup, but pls what do u mean by instant contact.
ReplyDeleteStage de pilotage Awesome article, it was exceptionally helpful! I simply began in this and I'm becoming more acquainted with it better! Cheers, keep doing awesome!
ReplyDeletewhat software did you use on the video?
ReplyDelete